banner
Home / Products / CS Series
Products
Battery Tester CS Series Single Channel Potentiostat Galvanostat

Battery Tester CS Series Single Channel Potentiostat Galvanostat

Battery Tester Single Channel Electrochemical Workstation Potentiostat Galvanostat CS electrochemical workstation (poten
Basic Info
Model NO. TOB-CS Series
After-sales Service 1 Year
Warranty 1 Year
Type Batteries Monomer Tester
Test Region Potentiostat Galvanostat
Application Lithium-ion Battery
Customized Customized
Net Weight 6.5kg
Potential Control Range ±10V
Current Control Range ±2A
Current Sensitivity 1PA
CV and Lsv Scan Rate 0.001mv~10,000V/S
Swv Frequency 0.001~100 kHz
Current Range 2na~2A, 10 Ranges
Ca and Cc Pulse Width 0.0001~65,000s
Transport Package Wooden Box
Specification 36.5 * 30.5 *16cm
Trademark TOB
Origin China
Production Capacity 10000 Set/Month
Product Description
Battery Tester Single Channel Electrochemical Workstation Potentiostat Galvanostat

CS electrochemical workstation (potentiostat / galvanostat) contains a fast digital function generator, high-speed data acquisition circuitry, a potentiostat and a galvanostat. With high performance in stability and accuracy with advanced hardware and well-functioned software, it is a comprehensive research platform for corrosion, batteries, electrochemical analysis, sensor, life science and environmental chemistry etc.

Applications(1) Reaction mechanism of Electrosynthesis, electrodeposition (electroplating), anodic oxidation, etc.(2) Electrochemical analysis and sensor; (3) New energy materials (Li-ion battery, solar cell, fuel cell, supercapacitors), advanced functional materials, photoelectronic materials;(4)Corrosion study of metals in water, concrete and soil etc;(5) Fast evaluation of corrosion inhibitor, water stabilizer, coating and cathodic protection efficiency.

Specifications

Support 2-, 3- or 4-electrode system

Potential control range: ±10V

Current control range: ±2A

Potential control accuracy: 0.1%×full range±1mV

Current control accuracy: 0.1%×full range

Potential resolution: 10μV (>100Hz),3μV (<10Hz)

Current sensitivity:1pA

Rise time: <1μS (<10mA), <10μS (<2A)

Reference electrode input impedance:1012Ω||20pF

Current range: 2nA~2A, 10 ranges

Compliance voltage: ±21V

Maximum current output: 2A

CV and LSV scan rate : 0.001mV~10,000V/s

CA and CC pulse width: 0.0001~65,000s

Current increment during scan: [email protected]/ms

Potential increment during scan: [email protected]/ms

SWV frequency: 0.001~100 kHz

DPV and NPV pulse width: 0.0001~1000s

AD data acquisition:[email protected] MHz,[email protected] kHz

DA Resolution:16bit, setup time:1μs

Minimum potential increment in CV: 0.075mV

IMP frequency: 10μHz~1MHz

Low-pass filters: Covering 8-decade

Potential and current range: Automatic

PC and O/S requirement

Interface: USB 2.0

Operating System:

Windows 2000/NT/XP/ win7/win8/win10

Weight / Measurements

Net weight: 6.5kg Gross weight: 10kg

Instrument size: 36.5 x 30.5 x16cm; After package: 52.5 x 37.5x 22.5cm

Electrochemical Impedance Spectroscopy(EIS)

Signal generator

Frequency range:10μHz~1MHz

AC amplitude:1mV~2500mV

DC Bias:-10~+10V

Output impedance:50Ω

Waveform: sine wave, triangular wave and square wave

Wave distortion:<1%

Scanning mode: logarithmic/linear, increase/decrease

Signal analyzer

Integral time:minimum:10ms or the longest time of a cycle

Maximum:106 cycles or 105s

Measurement delay:0~105s

DC offset compensation

Potential automatic compensation range:-10V~+10V

Current compensation range:-1A~+1A

Bandwidth: 8-decade frequency range, automatic and manual setting

Technical advantages

1. Impedance (EIS)CS potentiostat applies correlation integral algorithm and dual-channel over-sampling technique, and has strong anti-interference ability. It is suitable for EIS measurements of high-impedance system (>109Ω, such as coating, concrete etc.). It can also be used to obtain Mott-Schottky curve and differential capacitance curve. During test, the software can display real-time open circuit potential(OCP) without entering.

Battery Tester CS Series Single Channel Potentiostat Galvanostat

2. Polarization curve

Polarization curve / Tafel plot can be obtained. The user can set the anodic reversal current (passivation film breakdown current) of the cyclic polarization curve to determine material's pitting potential and protection potential and evaluate the its susceptibility to intergranular corrosion. The software employs non-linear fitting to analyze polarization curve, and can make fast evaluation of material's anti-corrosion ability and inhibitors.

3. Voltammetry

It can do the following experiments: Linear Sweep Voltammetry(LSV), Cyclic Voltammetry(CV), Staircase Cyclic Voltammetry(SCV), Square wave voltammetry(SWV), Differential Pulse Voltammetry(DPV), Normal Pulse Voltammetry(NPV), AC voltammetry(ACV), Stripping voltammetry etc. It integrates calculation of peak area, peak current and standard curve analysis.

Battery Tester CS Series Single Channel Potentiostat Galvanostat

Battery Tester CS Series Single Channel Potentiostat Galvanostat